01
05
Start-up, Filling and Emptying
Page 25
Empty powder container (cont.)
If the powder container is
not properly installed on the
machine, the message Please
replace powder container! will
be displayed.
Slide powder container back to
limit stop.
Place the powder container on
the machine.
Empty, clean and dry the pow-
der container.
Seal powder container with
cover.
WARNING
Risk of scalding!
from hot water and splatters.
Transport carefully and allow to cool down, if necessary.
Empty slowly and carefully.
NOTICE
Replace drip tray.Insert the drip grid.Clean and dry the drip tray and
drip grid.
Remove the drip grid and empty
the drip tray.
Remove the drip tray.
Water may spill out!
Always transport the drip tray
horizontally.
Emptying the drip tray (optional)
To Next Page
Loading...
Need help?
General
