Start-up, Filling and Emptying
Page 26
Select product
Coffee
Coffee
small
Machine switches to Product
level.
The machine is ready.
Prepare milk system (prime)
Maintenance
Stop
Rinse
Prepare milk pump (prime)
Activate wipe protection
Espresso Coffee
Select product
Priming milk
For optimum drink quality, there must be milk in the feed lines from
the start.
You must prime the machine so that milk is drawn back into the
lines after each replacement and after cleaning.
Prepare milk pump (prime)
NOTICE
The priming can be interrupted
with Stop.
The Pura starts Priming milk.
Insert the milk container.
Insert the suction tube through
the opening in the cover.
Close the door.
Select Prepare milk pump
(prime).
Remove the cover.
Fill the milk container with milk
and seal it with the cover
Switch to the Maintenance
level.
Open the door.
Remove the intake hose and
pull the Milk container out to
the front.
The quality of the milk may be impaired!
Only use pre-cooled milk.
Only touch the intake hose after sanitizing your hands, or wear
disposable gloves.
Filling the milk container (optional)
To Next Page
Loading...
Need help?
General
