Franke Spectra S - Preparing Drinks with the Vetro Control Panel

4
01
4 4 4
02 03 04
!
4 4 4 4
01 02 03
Preparing drinks Page 22
Please select
Please select
Preparing drinks with the Vetro control panel (variation)
The LEDs for the drinks that
can be selected light up. The
drink is ready.
Place the appropriate cup or
glass under the outlet.
The outlet moves downwards,
the LED of the selected product
begins to flash.
Press the Product button.
Preparation begins.
Risk of scalding or burning!
The dispensers and drinks are
hot.
Only touch the outlets
on the insulated handles.
Do not touch the area under
the outlets.
WARNING
Place the appropriate cup or
glass under the outlet.
The LEDs for the drinks that
can be selected light up. The
drink is ready.
The outlet moves downwards,
the LED of the selected product
begins to flash.
Press the Product button within
5 seconds.
Preparation begins.
Press the shift button.
The products in the 2nd level
become active.
Preparing drinks in the 2nd content level The shift button must be programmed.
04
05