Konfigurieren
Page 31
All programming menu items
are shown on the following
pages. Some of these menu
items may not feature on your
Spectra depending on the
configuration.
Front door lock
Navigating within the menu
Insert the Adjust plus card into the card reader.
The menu appears.
Use +/– to navigate through the menu. Use
Clean to select an option, and use Exit
to quit an option without saving your selection.
Programming keypad
On/Off
Clean Clean button
or Save button
(in programming mode)
USB port
Buttons for programming mode:
+ Scroll through menu
– Scroll through menu
Exit Cancel button (without saving)
Chip card reader
Cover
Adjust plus card
The Adjust plus card is used to:
Operate the machine (restrict access)
Modify parameters
Store settings
Your Spectra is completely and individually programmable – so that the Spectra is just as flexible as you.
We have kept the programming simple to make your job easier. Try it for yourself.
Konfigurieren
Controls
To Next Page
Loading...
