Franke Spectra S - Page 40

Konfigurieren Page 38
11Download menu
10Quality check
9Card service
8Display
7Display errors
6Clear counters
5Display counters
4Accounting
3Temperature
2Clock
1Product definition
Confirm the new PIN by press-
ing Clean.
Enter the new PIN and confirm
by pressing Clean.
To change the PIN, enter the
current PIN and confirm by
pressing Clean.
+/– to change
+/– to change
The product is prepared and
dispensed one step at a time..
Each step must be started by
pressing the product button.
The powder is ejected into the
grounds container. Special tool
required.
The ground material is ejected
into the grounds container.
Press Clean to start
Press Clean to start
Press Clean to start
10.3 Product10.2 Instant powder 10.1 Grind quantity
+/– to change
+/– to change
+/– to change
9.1 Enter PIN
Confirm new PIN
0000
9.1 Enter PIN
Enter new PIN
0000
9.1 Enter PIN
0000
11 Download menu
11.2 Card >> machine
11 Download menu
11.1 Machine >> card
Copy the settings on the card
to the Spectra S.
Press 38 Clean to start copy-
ing.
Save the settings of the Spec-
tra S to the Adjust plus card.
Press 38 Clean to save the
data.