SY380 Series Boost Inverter
- 1 -
Preface
Thank you for choosing FRECON developed and produced SY380 series
vector control inverter.
SY380 Series Boost inverteris mainly positioned as a high-end market for OEM customers and
the specific requirements of fan and pump load applications，its flexible design, both embedded SVC
and VF control in one，can be widely used for speed control accuracy, torque response speed,
low-frequency output characteristics and other situations with higher requirements.
This user manual supplies a detailed description of SY380 Series Boost inverterincludes product
characterization, structural features, parameter setting, operation and commissioning, inspection
maintenance and other contents. Be sure to carefully read through the safety precautions before use,
and use this product on the premise that personnel and equipment safety is ensured.
◆To illustrate the details of the products，pictures in this manual based on products with outer
casing or safety cover being removed. When using this product, please be sure to well install
outer casing or covering by the rules, and operating in accordance with the manual contents.
◆The illustrations this manual for illustration only and may vary with different products you have
ordered.
◆The company is committed to continuous improvement of products, product features will
continue to upgrade, the information provided is subject to change without notice.
◆If you are using have questions, please contact our regional agents or our customer service
center. Customer Service Tel 0755 -88605930
◆The company's other products please visit our website. http://www.frecon.com.cn
To Next Page
Need help?
General