Frecon PV100-2S-1.5B - User Manual

PV series Solar Pumping Inverter
- 1 -
Preface
PV200 special inverters are developed for power supply of water pumps, based on the core
control arithmetic of FR200 vector control inverters, combined with the control requirements of PV
water pump application. The function of maximum power tracking, dormant at weak light, wake up at
strong light, high water level dormant, under-load pre-warning and other control protection functions
can ensure normal operation of water pumps according to the customers’ requirements to switch to the
grid power supply.
Please refer to this manual to commission the inverter, product maintenance refer to FR200 user
manual.
IMPORTANT NOTES
◆To illustrate the details of the products，pictures in this manual based on products with outer
casing or safety cover being removed. When using this product, please be sure to well install
outer casing or covering by the rules, and operating in accordance with the manual contents.
◆The illustrations in this manual are for illustration only and may vary with different products
you have ordered.
◆The company is committed to continuous improvement of products, product features will
continue to upgrade, the information provided is subject to change without notice.
◆If there is any questions when using, please contact our regional agents or our customer
service center:(+86-0755-33067999)
◆For other products, please visit our website. http://www.frecon.com.cn

Summary

Preface

Important Notes

Provides critical usage guidelines, cautions, and disclaimers for the product manual and its contents.

Chapter One Product Overview

1.1 Name Plate

Describes the information found on the inverter's name plate for identification and specifications.

1.2 Product Specifications

Lists the electrical specifications for AC220V/DC310V and AC380V/DC540V input products.

1.3 Dimension Drawing

Presents dimension drawings and installation sizes for PV100 and PV200 models.

Chapter Two Commissioning Guide

2.1 PV Panel Power Supply Commissioning

Details the procedures and wiring diagrams for commissioning the inverter using PV panel power supply.

2.2 Grid or Generator power supply wirings

Explains the wiring diagrams for connecting the inverter to grid or generator power sources.

2.3 Wiring diagram between VFD and single phase motor

Provides guidance on wiring diagrams for connecting the VFD to single-phase motors.

2.4 Product Terminal Configuration

Details the main and control circuit terminal configurations for the inverter.

Chapter Three Function Parameters

3.1 The Basic Function Parameters

Lists and explains the basic function parameters of the inverter, covering system and frequency settings.

3.2 H00 Group: Detailed Explanation of Function Code

Provides detailed explanations for function codes within the H00 group, specific to PV pump applications.

Frecon PV100-2S-1.5B Specifications

General

Brand	Frecon
Model	PV100-2S-1.5B
Category	Inverter
Language	English