Frecon PV200-4T-4.0B - User Manual

PV series Solar Pumping Inverter
- 1 -
Preface
PV200 special inverters are developed for power supply of water pumps, based on the core
control arithmetic of FR200 vector control inverters, combined with the control requirements of PV
water pump application. The function of maximum power tracking, dormant at weak light, wake up at
strong light, high water level dormant, under-load pre-warning and other control protection functions
can ensure normal operation of water pumps according to the customers’ requirements to switch to the
grid power supply.
Please refer to this manual to commission the inverter, product maintenance refer to FR200 user
manual.
IMPORTANT NOTES
◆To illustrate the details of the products，pictures in this manual based on products with outer
casing or safety cover being removed. When using this product, please be sure to well install
outer casing or covering by the rules, and operating in accordance with the manual contents.
◆The illustrations in this manual are for illustration only and may vary with different products
you have ordered.
◆The company is committed to continuous improvement of products, product features will
continue to upgrade, the information provided is subject to change without notice.
◆If there is any questions when using, please contact our regional agents or our customer
service center:(+86-0755-33067999)
◆For other products, please visit our website. http://www.frecon.com.cn

Summary

Preface

IMPORTANT NOTES

Chapter One Product Overview

1.1 Name Plate

Details the identification label of the inverter, including model and serial number.

1.2 Product Specifications

Lists electrical specifications, power ratings, and physical dimensions for various inverter models.

1.3 Dimension Drawing

Provides physical dimensions and wall mounting diagrams for PV100 and PV200 series inverters.

Chapter Two Commissioning Guide

2.1 PV Panel Power Supply Commissioning

Guides on wiring PV panels to the inverter for power supply and initial setup.

2.2 Grid or Generator Power Supply Wirings

Provides wiring diagrams for connecting grid or generator power sources to the inverter.

2.3 Wiring diagram between VFD and single phase motor

Illustrates wiring connections between the VFD and single-phase motors.

2.4 Product Terminal Configuration

Details the main and control circuit terminal configurations for the PV200 inverter.

Chapter Three Function Parameters

3.1 The Basic Function Parameters

Explains fundamental system and frequency-related parameters for inverter configuration.

H00 Group: PV Pump Special Set

Details special function parameters for PV pump applications.

Chapter Four Troubleshooting and Countermeasures

Err01 Acceleration Overcurrent

Addresses issues related to excessive current during acceleration.

Err04 Acceleration Overvoltage

Covers problems with overvoltage during acceleration phases.

Err08 Short circuit protection

Details troubleshooting for short circuit faults in the system.

Err11 Motor Overload

Provides solutions for motor overload conditions.

Err14 Overheat

Explains how to resolve overheating issues in the inverter.

Frecon PV200-4T-4.0B Specifications

General

Brand	Frecon
Model	PV200-4T-4.0B
Category	Inverter
Language	English