Frecon PV200-4T-055 - User Manual

PV series Solar Pumping Inverter
- 1 -
Preface
PV200 special inverters are developed for power supply of water pumps, based on the core
control arithmetic of FR200 vector control inverters, combined with the control requirements of PV
water pump application. The function of maximum power tracking, dormant at weak light, wake up at
strong light, high water level dormant, under-load pre-warning and other control protection functions
can ensure normal operation of water pumps according to the customers’ requirements to switch to the
grid power supply.
Please refer to this manual to commission the inverter, product maintenance refer to FR200 user
manual.
IMPORTANT NOTES
◆To illustrate the details of the products，pictures in this manual based on products with outer
casing or safety cover being removed. When using this product, please be sure to well install
outer casing or covering by the rules, and operating in accordance with the manual contents.
◆The illustrations in this manual are for illustration only and may vary with different products
you have ordered.
◆The company is committed to continuous improvement of products, product features will
continue to upgrade, the information provided is subject to change without notice.
◆If there is any questions when using, please contact our regional agents or our customer
service center:(+86-0755-33067999)
◆For other products, please visit our website. http://www.frecon.com.cn

Summary

Chapter Two Commissioning Guide

Chapter Three Function Parameters

Basic Function Parameters

H00 Group: Detailed Explanation of Function Code

Chapter Four Troubleshooting and Countermeasures

Acceleration Overcurrent (Err01)

Troubleshooting steps for acceleration overcurrent faults (Err01).

Deceleration Overcurrent (Err02)

Troubleshooting steps for deceleration overcurrent faults (Err02).

Constant-speed Overcurrent (Err03)

Troubleshooting steps for constant-speed overcurrent faults (Err03).

Acceleration Overvoltage (Err04)

Troubleshooting steps for acceleration overvoltage faults (Err04).

Deceleration Overvoltage (Err05)

Troubleshooting steps for deceleration overvoltage faults (Err05).

Constant-speed Overvoltage (Err06)

Troubleshooting steps for constant-speed overvoltage faults (Err06).

Bus Under voltage Protection (Err07)

Troubleshooting steps for bus under-voltage protection faults (Err07).

Short Circuit Protection (Err08)

Troubleshooting steps for short circuit protection faults (Err08).

Input Open-phase (Err09)

Troubleshooting steps for input open-phase faults (Err09).

Output Open-phase (Err10)

Troubleshooting steps for output open-phase faults (Err10).

Motor Overload (Err11)

Troubleshooting steps for motor overload faults (Err11).

Inverter Overload (Err12)

Troubleshooting steps for inverter overload faults (Err12).

Fault Protection of External Input (Err13)

Overheat (Err14)

Memory Failure (Err15)

Frecon PV200-4T-055 Specifications

General

Brand	Frecon
Model	PV200-4T-055
Category	Inverter
Language	English