Frecon PV200 Series - User Manual

PV series Solar Pumping Inverter
- 1 -
Preface
PV200 special inverters are developed for power supply of water pumps, based on the core
control arithmetic of FR200 vector control inverters, combined with the control requirements of PV
water pump application. The function of maximum power tracking, dormant at weak light, wake up at
strong light, high water level dormant, under-load pre-warning and other control protection functions
can ensure normal operation of water pumps according to the customers’ requirements to switch to the
grid power supply.
Please refer to this manual to commission the inverter, product maintenance refer to FR200 user
manual.
IMPORTANT NOTES
◆To illustrate the details of the products，pictures in this manual based on products with outer
casing or safety cover being removed. When using this product, please be sure to well install
outer casing or covering by the rules, and operating in accordance with the manual contents.
◆The illustrations in this manual are for illustration only and may vary with different products
you have ordered.
◆The company is committed to continuous improvement of products, product features will
continue to upgrade, the information provided is subject to change without notice.
◆If there is any questions when using, please contact our regional agents or our customer
service center:(+86-0755-33067999)
◆For other products, please visit our website. http://www.frecon.com.cn

Summary

Chapter One Product Overview

1.1 Name Plate

Details about the product's identification label and its components.

1.2 Product Specifications

Technical specifications, including electrical data and case sizes for various models.

1.3 Dimension Drawing

Visual representation of product dimensions and mounting details.

Chapter Two Commissioning Guide

2.1 PV Panel Power Supply Commissioning

Wiring diagrams and steps for connecting PV panels to the inverter.

2.2 Grid or Generator Power Supply Wirings

Diagrams and instructions for connecting grid or generator power.

2.3 Wiring Diagram between VFD and Single Phase Motor

Guidance on connecting the inverter to single-phase motors.

2.4 Product Terminal Configuration

Detailed breakdown of main and control circuit terminals on the inverter.

Chapter Three Function Parameters

3.1 The Basic Function Parameters

Overview of fundamental system and frequency parameters for inverter configuration.

Chapter Four Troubleshooting and Countermeasures

Err01 Acceleration Overcurrent

Troubleshooting steps for overcurrent faults during acceleration.

Err02 Deceleration Overcurrent

Troubleshooting steps for overcurrent faults during deceleration.

Err03 Constant-speed Overcurrent

Troubleshooting steps for overcurrent faults during constant speed operation.

Frecon PV200 Series Specifications

General

Brand	Frecon
Model	PV200 Series
Category	Inverter
Language	English