Frecon PV100 Series - User Manual

PV series Solar Pumping Inverter
- 1 -
Preface
PV200 special inverters are developed for power supply of water pumps, based on the core
control arithmetic of FR200 vector control inverters, combined with the control requirements of PV
water pump application. The function of maximum power tracking, dormant at weak light, wake up at
strong light, high water level dormant, under-load pre-warning and other control protection functions
can ensure normal operation of water pumps according to the customers’ requirements to switch to the
grid power supply.
Please refer to this manual to commission the inverter, product maintenance refer to FR200 user
manual.
IMPORTANT NOTES
◆To illustrate the details of the products，pictures in this manual based on products with outer
casing or safety cover being removed. When using this product, please be sure to well install
outer casing or covering by the rules, and operating in accordance with the manual contents.
◆The illustrations in this manual are for illustration only and may vary with different products
you have ordered.
◆The company is committed to continuous improvement of products, product features will
continue to upgrade, the information provided is subject to change without notice.
◆If there is any questions when using, please contact our regional agents or our customer
service center:(+86-0755-33067999)
◆For other products, please visit our website. http://www.frecon.com.cn

Summary

Preface

Important Safety and Usage Notes

Key guidelines for product use, installation, and precautions to ensure safe operation and correct handling of the inverter.

Product Overview and Specifications

Name Plate and Model Identification

Explains the information presented on the inverter's name plate and the rules for product model naming.

Technical Product Specifications

Detailed electric specifications for AC220V/DC310V and AC380V/DC540V input products, including power, current, and motor ratings.

Dimension and Mounting Drawings

Provides physical dimensions, mounting diagrams, and size tables for PV100 and PV200 series inverters.

Commissioning and Installation Guide

PV Panel Power Supply Commissioning

Outlines the wiring procedures for connecting PV panels to the inverter for power supply, with diagrams for different power ranges.

Grid or Generator Power Supply Wiring

Details wiring diagrams for connecting the inverter to grid or generator power sources, including switching logic.

VFD to Single Phase Motor Wiring

Illustrates internal wiring diagrams for single-phase motors and how to connect them to the VFD, covering forward and reverse wiring.

Inverter Terminal Configuration

Explains the functions of the main circuit and control circuit terminals on the PV200 inverter for proper connection.

Function Parameters and Settings

Basic System and Frequency Parameters

Covers fundamental system parameters like password, reset control, carrier frequency, fan control, and frequency command sources.

Motor 1 Performance Parameters

Details parameters related to motor characteristics, including type, power, voltage, current, wiring, and electrical properties.

Fault, Protection, and Speed Control Parameters

Explains parameters for overcurrent/overvoltage stall control, acceleration/deceleration, and various protection settings.

PID Control and Keypad Settings

Describes parameters for PID control loops, including setting, feedback, gains, and keypad operation functions.

Status Monitoring and Failure Records

Lists parameters for monitoring inverter status, digital/analog inputs/outputs, and recording fault categories.

PV Pump Special Set Parameters

Covers specific parameters for PV pump applications, including control modes, voltage references, and weak light/water level settings.

Troubleshooting and Error Code Resolution

Overcurrent and Overvoltage Faults

Addresses troubleshooting steps for overcurrent and overvoltage errors (Err01-Err06), including fault reasons and solutions.

Protection and Input;Output Faults

Provides guidance for resolving faults related to protection mechanisms, input/output issues, and general system errors (Err07-Err15).

Communication, Parameter, and Hardware Faults

Details solutions for errors stemming from communication failures, parameter issues, hardware malfunctions, and environmental factors (Err16-Err25).

System, Load, and Special Function Faults

Covers troubleshooting for system-level faults, load-related issues, soft-start, EEPROM, and specific pre-warning conditions (Err26-Arn34).

Frecon PV100 Series Specifications

General

Brand	Frecon
Model	PV100 Series
Category	Inverter
Language	English