Frecon PV100-2S-0.7B - User Manual

PV series Solar Pumping Inverter
- 1 -
Preface
PV200 special inverters are developed for power supply of water pumps, based on the core
control arithmetic of FR200 vector control inverters, combined with the control requirements of PV
water pump application. The function of maximum power tracking, dormant at weak light, wake up at
strong light, high water level dormant, under-load pre-warning and other control protection functions
can ensure normal operation of water pumps according to the customers’ requirements to switch to the
grid power supply.
Please refer to this manual to commission the inverter, product maintenance refer to FR200 user
manual.
IMPORTANT NOTES
◆To illustrate the details of the products，pictures in this manual based on products with outer
casing or safety cover being removed. When using this product, please be sure to well install
outer casing or covering by the rules, and operating in accordance with the manual contents.
◆The illustrations in this manual are for illustration only and may vary with different products
you have ordered.
◆The company is committed to continuous improvement of products, product features will
continue to upgrade, the information provided is subject to change without notice.
◆If there is any questions when using, please contact our regional agents or our customer
service center:(+86-0755-33067999)
◆For other products, please visit our website. http://www.frecon.com.cn

Summary

Preface

Important Notes and Precautions

Key information and precautions for using the product manual and the product itself.

Chapter One Product Overview

1.1 Product Name Plate

Details of the product's identification label, including model, power, and specifications.

1.2 Product Specifications

Electric specifications for AC220V/DC310V and AC380V/DC540V input products, including power, current, and motor ratings.

1.3 Dimension and Mounting Drawings

Physical dimensions and mounting diagrams for PV100 and PV200 series inverters.

Chapter Two Commissioning Guide

2.1 PV Panel Power Supply Commissioning

Wiring diagrams and steps for connecting and commissioning the inverter with PV panels.

2.2 Grid or Generator Power Supply Wiring

Wiring diagrams for connecting the inverter to grid or generator power sources.

2.3 VFD to Single Phase Motor Wiring

Guidance on wiring the inverter to single-phase motors, including internal motor wiring diagrams.

2.4 Product Terminal Configuration

Detailed diagrams and functions of the inverter's main and control circuit terminals.

Chapter Three Function Parameters

3.1 Basic Function Parameters

Overview of system, frequency, acceleration/deceleration, and digital input parameters.

3.2 H00 Group: PV Pump Function Codes

In-depth explanation of function codes within the H00 group, specific to PV pump applications.

Chapter Four Troubleshooting and Countermeasures

Overcurrent & Overvoltage Faults (Err01-Err06)

Identifies causes and solutions for acceleration, deceleration, and constant-speed overcurrent/overvoltage faults.

Circuit, Phase, and Load Faults (Err07-Err12)

Troubleshooting for bus under voltage, short circuit, open-phase, motor/inverter overload issues.

System Errors and Warnings (Err13-Arn34)

Covers external input, overheat, memory, communication, PID, parameter, braking, sensor, and pre-warning faults.

Frecon PV100-2S-0.7B Specifications

General

Brand	Frecon
Model	PV100-2S-0.7B
Category	Inverter
Language	English