Maintenance
Reasonable cleaning/lubricating should be undertaken to extend the life time of this unit.
Performance is maximized when the belt and mat are kept as clean as possible.
WARNING: THE MAT/DECK FRICTION PLAYS A MAJOR ROLE IN THE FUNCTION AND LIFE OF YOUR
TREADMILL. FOR THESE REASONS WE RECOMMEND YOU REGULARLY LUBRICATE THESE FRICTION POINTS
TO PROLONG THE USEFUL LIFE OF YOUR TREADMILL. FAILING TO DO THIS MAY VOID YOUR WARRANTY.
WARNING: ALWAYS UNPLUG THE POWER CORD BEFORE UNDERTAKING ANY MAINTENANCE.
WARNING: STOP TREADMILL BEFORE FOLDING IT BACK UP.
Maintenance and servicing
AFTER EACH USE (DAILY)
Clean and inspect, following these steps:
1) Turn off the treadmill using the on/off switch, and then unplug the power cord at the wall
outlet.
2) Wipe down the running belt, deck, motor cover, and console casing with a damp cloth.
Never use solvents, as they can cause damage to the treadmill.
3) Inspect the power cord.
4) Make sure the power cord is not underneath the treadmill or in any other area where it can
become pinched or cut.
5) Check the tension and alignment of the running belt. Make sure that the treadmill belt is not
damaging any other components on the treadmill by being misaligned.
EVERY WEEK
Clean underneath the treadmill, following these steps:
1) Turn off the treadmill with the star/stop switch, and then unplug the power cord at the wall
outlet.
2) Fold the treadmill into the upright position, making sure that the lock latch is secure.
3) Wipe or vacuum any dust particles or other objects that may have accumulated underneath
the treadmill.
To Next Page
Loading...
