EasyManua.ls Logo

Freeform F100 - Belt;Deck;Roller Lubrication Procedures

Freeform F100
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2) Pay particular attention to the fixing knobs and make sure they are tight.
3) Always replace the mat if worn and any other defective parts.
4)
If in doubt do not use the treadmill and contact our helpline on 0800 222 190.
TAKE CARE TO PROTECT CARPETS AND FLOOR we recommend use of a rubberised
equipment mat.
How to check the running mat for proper lubrication:
4) Disconnect the main power supply.
5) Fold the treadmill up into the storage position.
6) Feel the back surface of the running mat.
If the surface is slick when touched, then no further lubrication is needed.
If the surface is dry to the touch, apply a suitable silicone lubricant.
We recommend you use a silicon based spray or liquid silicon oil to lubricate your
treadmill. This can be purchased from No1 Fitness or a local hardware store.
Belt/Deck/Roller Lubrication
The mat/deck friction play a major role in the function and life of your treadmill and that is why we
recommend you regularly lubricate this friction point to prolong the useful life of your treadmill.
You should apply the lubrication after approximately the first 20 hours of operation. We recommend
lubrication of the deck every 30 days.
See below procedures for lubricating:
1) Use a soft, dry cloth to wipe the area between the belt and deck.
2) Spread lubricant onto the inside surface of belt and deck evenly (make sure the machine is
turned off and power is disconnected).
3) Periodically lubricate the front and rear rollers to keep them at their peak performance.

Related product manuals