THE OPERATION OF EXERCISE PROCESS:
1. Press speed-down will reduce the running speed.
2. Press speed-up will increase the running speed.
3. Press incline down will reduce the incline section.
4. Press incline up will increase the incline section.
5. Press speed shortcut button will adjust speed correspondingly.
6. Press incline shortcut button will adjust incline correspondingly.
7. Press STOP will reduce until it stopped.
8. When the user holds the hand pulse by both hands, the computer will show the user’s pulse data
after 5 seconds.
MANUAL MODE:
1.Under standby mode, press START button directly, the treadmill will work from the speed 0.5km/h,
incline 0. The other windows will start to count from positive direction from windows default, press
“SPEED+”, “SPEED-” change the speed, press “INCLINE+”、“INCLINE -”to change the incline;
2. Under standby mode, press “MODE” button to enter time count down, the TIME window will
display“15：00” and glittering. Press “SPEED+”, “SPEED-” , “INCLINE+”、 “INCLINE –“ to set up
the time what you need. The setting range is 5:00-99:00.
3.Under Time setting mode, press “ MODE “ button to enter into distance count down, the
DISTANCE window will display “1.0” and glittering. Press “SPEED+”, “SPEED-”, “INCLINE+”、
“INCLINE –“ to set up the distance what you need. The setting range is 0.5—99.9.
4. Under Distance setting mode, press “MODE” button to enter into calories count down, the CAL
window will display “50’ and glittering. Press “SPEED+”, “SPEED-” , “INCLINE+”、 “INCLINE –“ to
set up the calories what you need. The setting range is 10-999.
5. When setting is finished, press “START” button to start up, the treadmill will run after 3 seconds,
press “SPEED+”, “SPEED-”, “INCLINE+”、 “INCLINE –“ to adjust the speed and the incline; press
the STOP, the treadmill will stop.
INNER INSTALL PROGRAM
Press “PROGRAM” button DISTANCE window will display P1-P24 to choose the program you like.
Setting of running time, then the TIME window display glittering. Display the advance setting
time10:00, press “SPEED+”, “SPEED-”, “INCLINE+”、 “INCLINE –“ to set up the exercise time what
you need. Press “START” button to start the inner install program, the inner install program is
divided into 10 sect. Each exercise time=the setting time/10. When the system enter into the next
sect will make 3 sound “Bi—“ and the speed will be changed according to the setting program, then
press “SPEED+”, “SPEED-”, “INCLINE+”、 “INCLINE –“ to change the SPEED and INCLINE,
When the program enter next section will come back to the current speed and incline, when the
machine finish the whole program that user has set, the system will make sound “Bi—Bi—Bi“ and
stop steadily, then show “END” in window display. The machine will enter standby mode after 5
seconds.
To Next Page
Loading...
