Freeform F60 - Page 6

Step 4:
Step 5
：
Step 6:
Fix the handrail bottom cover (66) to
the console with bolt ST4.2*12(100) by
using Wrench w/ screw driver (3).
Notice: Make sure the buckle of the
handrail bottom cover is inserted into
the handrail side cover before
assemble.
Assemble the handrail bottom cover to
the left and right upright tube B.
Fix console A to the left and right upright
tube B with bolt M8*32(85) and nut M8
(80) by using 5# Allen wrench (2).
Fix console A to the left and right upright
tube B with Bolt M8*15(82) and flat
washer (106) by using 5# Allen wrench
(2).
Notice: Make sure the console upper
wire C was connected to the console
middle wire C before assemble.
Fix the left upright tube and right upright
tube (49, 50) to the base frame A.
Notice: Make sure the buckle is fixed to
the base frame tube.