Freewing A-6E Intruder - Control Surface Direction and Set Up; Aileron and Elevator Control Direction; Rudder and Flaps Control Direction

Control Surface Direction and Set Up
EN
After the Airplane is assembled, but before first flight, switch on the radio and ensure the throttle is in the lowest
po sition. Engage the kill switch if one is assigned. Install a fully charged battery and connect it to the ESC.
Using the radio, ensure that all control surfaces move in the correct direction.
Ailerons
Stick Left
Elevator
Stick B ack
Rudder
Stick Left
Flaps
Flaps Down
 


Stick Right
Stick Forwar d

Stick Right
-12-