IMPORTANT: Use only nonabrasive chrome clean-
ers on stainless-steel clad parts. This prevents
scratching and marring of the polished surface.
To help protect the chrome after cleaning, apply a coat
of polishing wax to the surface. Never use wax on parts
that are exposed to high heat, such as exhaust pipes.
Dashboard Care
Periodically wipe the dashboard with a water-dampened
cloth. A mild detergent can be used, but avoid using
strong detergents.
Vinyl Upholstery Cleaning
To prevent soiling, frequent vacuuming or light brushing
to remove dust and dirt is recommended. Harsh clean-
ing agents can cause permanent damage to vinyl up-
holstery. To preserve the upholstery and prevent dam-
age, carefully review the following sections for
recommended cleaning procedures. Waxing or refinish-
ing improves soil resistance and cleanability for all vi-
nyls. Any hard wax, such as that used on automobiles,
may be used.
Ordinary Dirt
Wash the upholstery with warm water and mild soap,
such as saddle or oil soap. Apply soapy water to a
large area and allow to soak for a few minutes, then rub
briskly with a cloth to remove the dirt. This can be re-
peated several times, as necessary.
If dirt is deeply imbedded, use a soft bristle brush after
applying the soap.
If dirt is extremely difficult to remove, wall-washing
preparations normally found around the home can be
used. Powdered cleaners, such as those used for sinks
and tiles, are abrasive and must be used with caution
as they can scratch the vinyl or give it a permanent dull
appearance.
Chewing Gum
Harden the gum with an ice cube wrapped in a plastic
bag, then scrape off with a dull knife. Any remaining
traces of gum can be removed with an all-purpose light
oil (peanut butter will also work) and wiped off.
Tars, Asphalts, and Creosote
Each of these items stains vinyl after prolonged contact.
They should be wiped off immediately and the area
carefully cleaned, using a cloth dampened with naph-
tha.
Cab Appearance
8.2
To Next Page
Loading...
