Unusual noises.
The compressor does
not start immediately
after changing the
temperature setting.
Door seal is not air-tight
(possibly after reversing the
door).
Appliance is not level.
The appliance is touching the
wall or other objects.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
This is normal, no error has
occurred.
Carefully warm the leaking
sections of the door seal with a
hair dryer(on a cool setting). At
the same time shape the warmed
door seal by hand such that it sits
correctly.
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend the
component out of the way.
The compressor starts after a
period of time.
Heavy build-up of
frost, possibly also on
the door seal.
9
Description of the appliance
View of the appliance
1. Control panel
2. Flap
3. Upper drawers
4. Ice tray (inside)
5. Drawers
6. Lower drawer
7. Adjustable feet
8. Door
9. Shelves
1
2
3
4
5
6
7
9
8
Note: Due to unceasing modification of our products your refrigerator may be slightly different
from this Instruction Manual, but its functions and using methods remain the same.
To Next Page
Loading...
