Friedrich EMWRT-1 - Maximum Setpoint; Auto Changeover Setpoint Offset

20
18 – MAXIMUM SETPOINT
60-82 (80°F* factory setting) Select the maximum setpoint in °F that a guest can select.
19 – AUTO CHANGEOVER SETPOINT OFFSET
00-04 (01°F* factory setting) Select the difference between the guest-selected set point and
the heat and cool changeover temperatures.
This value plus the 1st stage differential dened in steps 02 and 04, denes the value
at which the thermostat would automatically change heating/cooling modes.
This feature allows adjustment between heat and cool changeover temperatures to
avoid the system from bouncing back and forth between heating and cooling under
normal operating conditions.
.
Custom Energy Savings Settings