Friedrich EMWRT-1 - Entering the Room Number; Configuring Equipment Settings

7
ENTERING THE ROOM NUMBER
Enter the room number by changing the digits on the screen. Leading zeros “0” preceding
other digits will be ignored, i.e. Room number “123” should be entered as “00123”.
➤ Use the “Up” and “Down” buttons to change the digit;
➤ Press the “Fan” button advance to the next digit;
➤ Press the “F/C” button to advance to the next menu;
Entering the room number correctly is crucial for proper operation of networked thermostats.
Thermostat Conguration
CONFIGURING THE EQUIPMENT SETTINGS - COMPRESSOR TYPE
➤ Use the “Up” and “Down” buttons to change the compressor type by changing the rst digit;
0 No Compressor
1 * Heat Pump
2 Air Conditioner
➤ Press the “Fan” button to advance to the next setting;
* Indicates factory setting;
COMPRESSOR TYPE