26 PB
MENU RETURN
MENU RETURN
The TM Menu (Timer)
This is the TM menu used to set a timer. See Figure 317.
In the menu, you set the current time using the arrow buttons. See Figure 318. (Note: These two “set clock” steps will be skipped if the unit is
already connected to Wi-Fi.)
First, set the hour.
Using the MENU button, you switch to the minutes and complete setting the time. See Figure 319.
You select your mode. Either cool, heat, or auto. Toggle these using the mode button. See Figure 320. (Note: cooling-only models skip this
step.)
The process is the same for all three modes. Auto mode will be shown as the example.
Figure 317
MENU
RETURN
Figure 318
MENU RETURN
Figure 319
Figure 320
OPERATION
User Interface - All Models
To Next Page
Loading...
Need help?
General
