Page
9
Fridges & Freezers Boxes
SERIE MS
STAINLESS STEEL
Series
Bulk measures have been calculated counting in also eventual bulges due to the following objects:
feet: 25 mm
handle hook-up: 5 mm
hinge: 10 mm
screws bulges: 3 mm
Bulk measures
To locate the fridge/freezer, consider the following bulk measures for the different models.
3. INSTALLATION
3.3 Measures
Because of the difference in temperature bet-
ween inside and outside the cabinet it is neces-
sary to let some space (for all sides) between
the fridge/freezer walls and the walls of the sur-
rounding pieces of furniture, it must be located
between. (Don’t remove feet!)*
The space lack for the air circulation can cause
condensation, that in the worst case can get rot
the eventual wood or cause mould on fibreglass
surfaces.
*If you must remove feet because of installation exi-
gencies, it is necessary to create some space for the
air circulation between the cabinet and the bearing
plane.
To locate the fridge/frrezer you must consider that the
handle hook-up must be fastened in a niche as in the pic-
ture on the right.
1
2
model/litres
FRIDGE
L=lenght / mm P=depth / mm A=height / mm
42 400 342 545
80 490 415 635
115 500 465 875
130 500 510 780
160 565 530 875
180 500 465 1035
FREEZER
60 500 515 875
80 550 560 780
90 565 580 740
110 565 580 875
WINE COOLERS
115 500 515 875
130 550 560 780
160 565 580 875
To Next Page
Loading...
