Page
21
4. GOOD FUNCTIONING CHECK
Fridges & Freezers Boxes
SERIE MS
STAINLESS STEEL
Series
To execute the check, after having made all the connections, both the electrical connec-
tions and the connections to the pipes, switch on the fridge/freezer and set the thermo-
stat to half way between maximum and minimum: within a minute the compressor will
start automatically.
4.1 Check
Make sure that all the con-
nections have been cor-
rectly made.
Press the switch on, that is
on the main electrical panel
or elsewhere according to
the installation.
Set the thermostat to
ON.
If the connections have been correctly
made, within a minute the compressor
will start and the fridge/freezer will
cool down.
1
2
3
4
CHECK PHASES
To Next Page
Loading...
