- Turn the batch freezing timer knob to the desired time.
This operation enables compressor functioning and starts
production.
Always remember to start the batch freezing time
otherwise the production cycle cannot start.
- If the acoustic warning is to be given when the batch
freezing time has expired, press the BUZZER key and
make sure that the key LED is green.
- When the time set on the batch freezing timer has passed,
the compressor stops and mixing continues. If the buzzer
has been enabled it will emit the acoustic warning.
If the consistency of the product is not that desired, a new
time value can be set on the timer that guarantees a better
consistency.
The residual batch freezing time can be increased or
decreased by acting on the timer at any time.
To Next Page
Loading...
