FRIGOMAT GX4Kompact, GX6, GX8 M04.42026 R.2019.05.30 18
EN
VI APPENDICE / APPENDIX / SUPPLEMENT / 6tttttttt / ssikisis / sisisisi / ssjjsjsjsj
The manufacturer will not be held liable for personal harm and/or
damage to objects deriving from incorrect installation and/or by
failure to comply with work accident-prevention standards. This
lack of compliance causes the warranty to terminate.
These operations are reserved exclusively for authorised quali-
fied personnel.
1 MAINTENANCE AND COMPONENTS REPLACEMENT
1.1 Maintenance intervals
1.2 Original spare parts
The list of spare parts that can be requested is available in chap. VII of this
manual
2 LONG WORKING INTERRUPTION
In case of inactivity of the machine for long periods, such as winter closures
etc., It is recommended that an authorized service technician
perform winter storage draining, to insure all water has been removed. This
will guard against freezing and rupturing of the components.
In case of machine inactivity in environments with the possibility of freezing,
it is important to protect the machine with the following precautions:
- Disconnect the water connections
- Relieve pressure on the spring in the water valve
- Use air pressure on the outlet side to blow out any water remaining in the
condenser. Failure to follow this procedure may cause
severe and costly damage to the refrigeration system.
3 DECOMMISSIONING
The machine contains electrical and/or electronic
materials and can contain fluids and/or oil. If it
needs to be decommissioned or disposed of, com-
ply with the standards in force in the Country whe-
re it is used.
EU Directive since August 13, 2005 (fig.VI/01)
The user is responsible for delivering the product
to the appropriate collection facility, as specified
by your local code.
Even packaging materials (crates or boxes) must
be divided by type and disposed of in compliance
with Standards in force in the Country where it is used when the
machine is decommissioned.
VI EXTRAORDINARY MAINTENANCE
Part description
check
every
3 months
Replacement
every
1 year
Replacement
every
4 years
Scraper
●
O-Ring knob beater
●
O-Ring cylinder drain plug
●
Cover
● ●
Insulating ring rubber
● ●
Insulating ring rubber Gasket
●
Transmission Belts
● ●
Drive Shaft O-Ring
●
Drive Shaft Bushing
●
Discharge drain Water
● ●
fig.VI/01
for the technician
To Next Page
Loading...
