- 44 -
Manual operation
Working with the core temperature probe
The core temperature sensor enables the cooking
process to be controlled by measurement of the
core temperature. In addition, by means of the
sensor, the HACCP data are recorded in the unit.
It can be used in any cooking mode, but it is
essential for DELTA-T cooking.
Clean the core temperature sensor before use.
Insert the core temperature sensor into the thickest
point (see application manual).
Caution!
The core temperature sensor may be hot – Danger
of burns! Use kitchen gloves.
Example roasting:
Desired Actual
The timer disabled.
A signal sounds when the preset core temperature
is reached and the yellow VarioCooking Control
®
button flashes.
Cool the core temperature sensor needle
before use.
- Do not allow the core temperature sensor to
hang out of the pan – Danger of damage!
- Remove the core temperature sensor before
removing the food from the pan - Danger of
damage!
- When not in use, put the core temperature
sensor in the place provided on the cover.
1
2
3
4
160°C
76°C 19°C
5
To Next Page
Loading...
