Making Telephone Calls with Convenience Functions
FRITZ!Box 7490 131
Accepting or Rejecting Waiting Calls on FON 1 and FON 2
Requirements
• The “Call waiting” feature must be enabled for the indi-
vidual telephone in the FRITZ!Box. The telephone set-
tings can be edited in the user interface of the FRITZ!Box
under “Telephony / Telephony Devices”.
Rejecting a Waiting Call
Press the keys R0.
Accepting a Waiting Call and Holding Call 1
1. Press the keys R2.
2. Press the following keys on the telephone:
Accepting a Waiting Call and Ending Call 1
1. Hang up.
Call 1 is ended and your telephone rings.
2. Pick up the handset.
You are connected with the waiting caller.
Function Keys
Ending call 2 and switching to call 1 R1
Switching between call 1 and call 2 (al-
ternating)
R2
Making a three-party conference call R3
Function Keys
Switching between call 1 and call 2 (al-
ternating)
R2
Ending call 2 and switching to call 1 R1
To Next Page
Loading...
