❒ Place the transport cover over the openings of the ash container
❒ Put on the ash container cover, pull out the transport lever and take the ash
container to the emptying point
After emptying the ash container:
❒ Replace the ash container in the boiler and clamp with the locking lever
❒
Replace the cover and secure with the clamps
➥ Make sure that the pin is inserted in the limit switch correctly.
4
Boiler Servicing
Inspection and cleaning
30 Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
To Next Page
Loading...
Need help?
General