What to do if my Froling TX 200 shows excessive temperature?
If your Froling Boiler is showing an excessive temperature, you can try the following: * Unscrew the cap on the STL (high-limit thermostat). * Unlock the STL (high-limit thermostat) by pressing with a screwdriver.
What to do if nothing is shown on the display of my Froling TX 200 Boiler?
If nothing is displayed on your Froling Boiler, consider the following: * Check if there is a general power failure. * Ensure the main switch is turned on. * Verify that the FI circuit breaker or line protection is switched on. * Inspect the fuse in the controller and replace it if faulty, noting the amperage (6.3AT).
Overview of the Froling TX wood chip boiler components and features.
Explanation of danger, warning, and caution symbols used in the manual.
Visual guide to symbols indicating requirements, prohibitions, and warnings.
Essential safety guidelines for operating, maintaining, and troubleshooting the boiler.
Details on the intended use of the boiler and compliance with regulations.
Requirements for personnel operating the boiler safely and effectively.
Specifies essential personal protective equipment for boiler operation and maintenance.
Technical specifications and requirements for boiler installation and room setup.
Description of critical safety components and their functions.
Identifies potential hazards and necessary precautions during operation.
Step-by-step instructions for handling system overheating, flue gas, or fire incidents.
Guidance on professional installation and the initial startup process for the boiler.
Instructions for loading wood chips or pellets into the fuel store.
Procedures for switching on the power, boiler, and regulating its operation.
Overview of servicing requirements and safety precautions for maintenance work.
Detailed procedures for inspecting and cleaning various boiler components.
Requirements and procedures for periodic emissions testing by authorities.
Information on recommended annual inspections and service agreements.
Guidance on using original parts and the implications of non-original parts.
Procedures for environmentally friendly disposal of ash and system components.
Diagnosing and resolving issues related to power supply and controller errors.
Steps to take when the boiler experiences excessive temperature.
Understanding and acknowledging fault messages displayed by the boiler controller.
Contact information for the manufacturer and installers.
General| Type | Pellet boiler |
|---|---|
| Nominal heat output | 200 kW |
| Efficiency | 92% |
| Fuel | Wood pellets |
| Output range | 60-200 kW |
To Next Page