Cleaning the ash from the heat exchanger
Heat exchanger with ash screws
❒ Remove both ash containers from the heat exchanger and clean where necessary
⇨ See "Emptying the heat exchanger ash container" [page
33]
❒ Remove both ash removal flanges
❒ Remove dirt and deposits from the side walls and from the ash screws.
➥ Always ensure there is a slight ash cover on the screws to protect them against
the high temperatures to which they are exposed.
❒
Check the ash removal seal and replace if necessary
❒ Check the heat exchanger for damage (cracks, etc.)
For heat exchanger with ashcan
❒ Remove both ashcans
⇨ See "Emptying the heat exchanger ash container" [page
33]
4
Boiler Servicing
Inspection and cleaning
40 Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
To Next Page
Loading...
