Froling TX 200 - Emptying the Heat Exchanger Ash Container

Emptying the heat exchanger ash container
For heat exchangers with ashcans:
❒ Remove the star knobs from the ashcan
❒
Take out the ashcan and empty the ash
For heat exchangers with ash screws:
❒ Remove the key plate from the safety switch
❒
Open the side fasteners on the ash container
❒ Remove the ash container cover and check the level
If the container needs emptying, proceed as follows:
❒
Replace the cover and close the side fasteners
Boiler Servicing
4
Inspection and cleaning
Operating Instructions TX 200-250 | B1060217_en 33