Fronius Acctiva Professional 35 A - Finishing and Disconnecting Power Supply Mode

36
No. 50: Device output fuse defective
Remedy:
- Contact After-Sales Service
No. 51: Secondary temperature out of range
Remedy:
- Contact After-Sales Service
No. 52: Current regulator defective
Remedy:
- Contact After-Sales Service
No. 53: External temperature sensor defective
Remedy:
- Replace external temperature sensor
Contact After-Sales Service in the event of the following charger faults (no. 60 onwards):
No. 60: Device fault - invalid characteristic number
No. 61: Device fault - invalid characteristic block
No. 62: Device fault - incorrect calibration values checksum
No. 63: Device fault - incorrect device type