Fronius Galvo Quick Start Guide

For more detailed information on how to upgrade the firmware for Fronius Datamanager 2.0 please see the
Operating Instructions on the Fronius website under Solar Energy / Products / System monitoring / Datalogging
/Fronius Datamanager 2.0 or click:
https://www.fronius.com/cps/rde/xchg/SID-3CFA85E0-
CB8FB9FB/fronius_international/hs.xsl/83_27954_ENG_HTML.htm#.V8Ql_OnylUY
*In case there is no internet connection on the Datamanager the software update can be run on a computer.
The software can be downloaded from the Fronius Website under Solar Energy/Info & Support/Software
Downloads/Software Updates or click here:
https://www.fronius.com/cps/rde/xchg/SID-3CFA85E0-
CB8FB9FB/fronius_international/hs.xsl/83_20347_ENG_HTML.htm#.V8QmNenylUY
Troubleshooting: Please read instruction manual or call
Fronius International - Technical Support Hotline
+43 (0) 7242 241- 5670
Fronius reserves all rights, in particular rights of reproduction, distribution and translation. No part of this work may be reproduced in any way
without the written consent of Fronius. It must not be saved, edited, reproduced or distributed using any electrical or electronic system.
You are hereby reminded that the information published in this document, despite exercising the greatest of care in its preparation, is subject
to change and that neither the author nor Fronius can accept any legal liability. Gender-specific wording refers equally to female and male
form.

Fronius Galvo Specifications

General

Protection Rating	IP 65
AC Nominal Voltage	230 V
Number of MPP Trackers	1
Power Output	1.5 kW to 3.1 kW
AC Voltage Range	180 V to 270 V
Operating Temperature Range	-25°C to +55°C
Protection Class	I