Need help?Do you have a question about the Fronius GEN24 and is the answer not in the manual?
General| Type | Hybrid Inverter |
|---|---|
| Power Range | 3.0 kW to 10.0 kW |
| Max. DC input voltage | 1000 V |
| Number of MPP Trackers | 2 |
| Operating Temperature Range | -25°C to +60°C |
| Efficiency | 98.2% |
| MPPT voltage range | 200 - 800 V |
| Interfaces | Wi-Fi / Ethernet / USB / RS485 |
| Warranty | 5 years (extendable) |
| Cooling | Active cooling |
Details on accessing the Country Setup menu, including access code and user restrictions.
Steps to request and utilize the access code for specific menu functionalities.
Guides for adjusting parameters via the Fronius Solar.start app and web browser.
Procedure for choosing the correct country or region setup for inverter configuration.
Configuration of grid monitoring times for inverter startup and reconnection processes.
Settings controlling the rate of change of effective power during startup and grid events.
Methods and parameters for detecting and preventing unintentional islanding situations.
Configuration of isolation measurement for safety warnings and error detection.
Settings for detecting and responding to DC arc faults and contact faults for safety.
Functionality and configuration of the residual current monitoring unit for protection.
Control of DC shutdown devices via communication protocols for system safety.
Configuration of overvoltage and undervoltage limits, including inner, middle, and outer thresholds.
Settings for overfrequency and underfrequency limits, including inner and outer thresholds.
Monitoring DC component injection and setting associated shutdown limits.
Inverter behavior configuration during grid voltage disturbances to maintain operation.
Voltage-dependent power control to avoid inverter shutdowns due to voltage limits.
Configuration of reactive power exchange with the grid for voltage regulation.
To Next Page