To Next PageTo Next Page
Need help?Do you have a question about the Fronius Galvo 3.0-1 and is the answer not in the manual?
General| Max. input voltage | 550 V |
|---|---|
| Nominal input voltage | 360 V |
| Dimensions | 645 x 431 x 204 mm |
| Protection class | IP 65 |
| Max. output current | 13 A |
| Number of MPP trackers | 1 |
| Maximum Input Voltage | 550 V |
| Cooling | Convection |
| Warranty | 5 years |
| AC nominal output | 3000 W |
| Max. apparent AC power | 3000 VA |
| Operating Temperature Range | -25°C to +55°C |
Defines DANGER, WARNING, CAUTION, NOTE, IMPORTANT symbols used in the manual.
Explains general safety principles and warnings regarding device operation.
Details requirements for personnel performing maintenance and repairs.
Details the intended use and limitations of the inverter.
Explains the purpose and importance of warning labels on the inverter.
Explains the Fronius Solar Net system and its data interface capabilities.
Details the functions and wiring variants of the multifunction current interface.
Overview of system monitoring capabilities and functions.
Guides through the initial setup and connection process.
Identifies and describes the physical controls and status LEDs.
Explains the purpose and operation of the function keys.
Guides on how to access and move within the SETUP menu.
Details activation/deactivation of WLAN access point for monitoring.
Explains using USB stick for logging and software updates.
Step-by-step guide for updating inverter software using a USB stick.
Details how to test the relay and set switch-on/off points.
Shows inverter fault status and recent grid faults.
Describes how the inverter handles short-term AC voltage interruptions.
Explains using a USB stick to log inverter data.
Provides steps to access the Basic menu using an access code.
Explains how the inverter displays fault and status codes.
Lists status codes requiring intervention by a trained service engineer.
Lists status codes that may require intervention by a trained service engineer.
