Fronius MagicWave 230i Quick Guide

MAGICWAVE 190, 230i / TRANSTIG 230i
MAGICWAVE 190, 230i / TRANSTIG 230i
Quick Guide
Quick Guide
Access the Setup menu
Access the Setup menu
Select the welding process
and operating mode
Select the welding process
and operating mode
Let gas ow out for 30
seconds
Let gas ow out for 30
seconds
1. Press and hold for more
than 3 seconds: save
currently selected para-
meters / menu item as a
favourite
2. Press once: retrieve fa-
vourite (factory setting)
3. Press once: retrieve
EasyJob*
1. Press and hold for more
than 3 seconds: save
currently selected para-
meters / menu item as a
favourite
2. Press once: retrieve fa-
vourite (factory setting)
3. Press once: retrieve
EasyJob*
1. Turn/press function
2. Press and hold for more than
3 seconds: save currently se-
lected parameters as a Job
1. Turn/press function
2. Press and hold for more than
3 seconds: save currently se-
lected parameters as a Job
* Prerequisite: the „Job“ function package is enabled
* Prerequisite: the „Job“ function package is enabled

Fronius MagicWave 230i Specifications

General

Output Current Range	5 - 230 A
Weight	21 kg
Welding Process	TIG, MMA
Open Circuit Voltage	70 V
Protection Class	IP 23
Mains Frequency	50/60 Hz
Rated Input Current	16 A
No-load Voltage	70 V
Input Voltage	3~400 V
Cooling	Fan
Rated Input Voltage	3 x 400 V