Fronius MTB 200i G ML/L268/flex - English

Contents
Safety 32
Proper use 32
Intended use 32
Safety 32
General 34
General 34
Up/Down function 34
JobMaster function 34
Functions of the torch trigger 35
Functions of the two-stage torch trigger 35
Function of the single-stage torch trigger 35
Notes on MTB/i Flex torch bodies 36
General 36
Definition of torch body bending 36
Maximum number of torch body bends 37
Bending possibilities 38
Installation and commissioning 39
Fitting wearing parts to the torch body 39
Assembling Multilock welding torches 40
Note regarding the inner liner with gascooled welding torches 40
Fitting the inner liner, SSFCW 41
Connecting the welding torch to the wirefeeder 43
Connecting the welding torch to the power source and the cooling unit 44
Twisting the Multilock welding torch body 45
Changing the torch body on a Multilock welding torch 46
Prisma holder for machine welding torch 47
Care, maintenance and disposal 48
General 48
Recognising faulty wearing parts 48
Maintenance at every start-up 48
Maintenance every time the wirespool/basket-type spool is changed 49
Troubleshooting 51
Troubleshooting 51
Technical data 56
General 56
Gas-cooled torch neck - MTB 200i - 360i ML flex 56
Water-cooled torch neck - MTB 330i - 400i ML flex 56
Torch body for self-shielded flux core wires MTB 3600 S G SSFCW, MTB 360i ML G FC, MTB 360i
ML W FC
56
Hosepack - MHP 700i W ML / FC, MHP 700i W ML M 56
Hosepack - MTW 750i / MTW 750i M 57
Hosepack - MHP 550i G ML M, MHP 550i G ML 57
31
EN