Fronius MTB 200i G ML/L268/flex - Maintenance Every Time the Wirespool;Basket-Type Spool Is Changed

1 2
* Check the gas nozzle, spatter guard and insulation for damage and replace any
damaged components.
- Also at every start-up when using water-cooled welding torches:
• check all coolant connections for tightness (no leaks)
• check that the coolant can flow unhindered
Maintenance
every time the
wirespool/basket-
type spool is
changed
- Clean wirefeeding hose with reduced compressed air
- Recommended: replace the inner liner. Clean the wearing parts before fitting the
new inner liner
1
2
3
4
5
1
49
EN