Fronius Primo 4.0-1 Service Manual

140
Replacing other components
Replacing other
components
If the following components are faulty, the entire inverter must be replaced:
- Housing parts (excluding covers)
- Inductors
- Heat sinks
- Seals (not including the seals on the covers)
The covers (DATCOM cover and power stage set cover) can be replaced as a module with
an injection-moulded seal.
WARNING! An electric shock can be fatal.
Observe the safety rules (see the beginning of the "Safety" section)

Fronius Primo 4.0-1 Specifications

General

Purpose	-
Output power	4000 W
Input voltage	80 - 1000 V
Output voltage	180 - 270 V
Input frequency	- Hz
Output frequency	50/60 Hz
Power supply type	Universal
Power current type	DC-to-AC
Output power capacity	4 kVA
Quantity per pack	1 pc(s)
Product color	Black, Grey