Fronius PullMig - Page 10

Set Electrode
Pressure
(1)
(2)
(3)
1
hard (e.g. CrNi)
2
medium (e.g. AlMg / CuSi)
3
soft (e.g. AlSi)
Replace Wire In-
let Nozzle
(2)
(1)
1
Unscrew hexagon nut using open-ended spanner (1)
-
spanner size 10 mm (.394 in.)
2
Unscrew and remove wire inlet nozzle using Allen key (2)
-
key width 2.5 mm (.099 in.)
10