To Next PageTo Next Page
Need help?Do you have a question about the Fronius TPS/i Push and is the answer not in the manual?
General| Brand | Fronius |
|---|---|
| Model | TPS/i Push |
| Category | Welding System |
| Language | English |
Explains the meaning of danger, warning, and caution symbols.
Outlines general safety requirements for device operation and personnel.
Covers risks from sparks, arc, EMF, shock, noise, fumes and required PPE.
Combines toxic gases, mains current, flying sparks, and other hazards.
Covers installation, operation, maintenance safety and equipment disposal.
Explains CE, CSA marks, EU declaration, and device warning notices.
Illustrates system setups for conventional and PAP robots.
Details push wire configurations for conventional robots.
Details push wire configurations for PAP robots.
Introduces WF wire-feed units, unreeling wirefeeders, hosepacks, and CrashBox.
Covers WF wire-feed unit concept, use, safety, and connection details.
Provides safety and operational information for REEL wirefeeder models.
Describes interconnecting/torch hosepacks, CrashBox /i, and clamp systems.
Step-by-step guide for installing the welding system on conventional robots.
Instructions for mounting the wirefeeder holder and the wirefeeder unit.
Details attaching the CrashBox /i to the robot flange, including torques.
Covers installation of MHP G/W, TPS/i torch neck, inner liner, and hosepacks.
Step-by-step guide for installing the welding system on PAP robots.
Instructions for mounting the WF 15i/25i/30i R PAP wire-feed unit.
Steps for installing the CrashBox /i PAP on the robot, including torques.
Covers installation of PAP hosepacks, inner liners, and interconnecting hosepacks.
Covers feed roller management, wire feeding, and contact pressure.
Guides on safely inserting and replacing feed rollers in wirefeeders.
Details procedures for feeding wire, including safety precautions.
Explains how to set contact pressure and general start-up requirements.
Provides a guide to diagnosing and resolving common welding system faults.
Outlines routine checks, cleaning, and maintenance tasks for longevity.
Lists specifications for wire-feed units, crash boxes, and hosepacks.
