11
Changing the
torch hosepack,
changing the
interconnecting
hosepack
If a robot wirefeeder or a media splitter is mounted in the third robot axis, take the follow-
ing into account when changing the torch hosepack or interconnecting hosepack:
CAUTION!
Risk of damage to the robot wirefeeder or media splitter from escaping coolant.
▶
After disconnecting the coolant hoses on the torch hosepack, close the coolant con-
nections with the cover provided immediately.
▶
Position the robot in such a way that escaping coolant cannot flow back into the
robot wirefeeder or the media splitter.
132
To Next Page
Loading...
