Fronius TPS/i Push - Torch Hosepack; General Remarks; Scope of Supply; Buttons on the Robacta MHP Hosepack

Torch hosepack
General remarks The Robacta MHP hosepack is designed for gas-cooled and water-cooled robot applica-
tions. It connects the TPS/i robot wirefeeders to the Robacta MTB robot welding torches.
Scope of supply
Robacta MHP PAP hosepack
Robacta MHP conventional hosepack
(1) Robacta MHP hosepack
Not supplied:
- Inner liners
- Inlet nozzles
Buttons on the
Robacta MHP
hosepack
Buttons on the Robacta MHP hosepack
"Wire threading" and "wire retract" buttons
are located on the Robacta MHP hosep-
ack
38