Fronius TPS/i Push User Manual

WF wire-feed unit
WF 15i R,
WF 15i R PAP
Supply voltage 24 V DC / 60 V DC
Nominal current 0.5 A / 1 A
Welding current at 10 min/40 °C (104 °F) 40% D.C.* 650 A
60% D.C.* 600 A
100% D.C.* 500 A
Maximum shielding gas pressure 7 bar / 101.53 psi
Coolant Original Fronius
Maximum coolant pressure 5 bar / 72.53 psi
Wire speed 0.5 - 15 m/min / 19.68 - 590.55 ipm
Wire drive 4-roller drive
Recommended wire diameter 0.8 - 2.4 mm / 03 - 09 in.
Degree of protection IP 43
Mark of conformity CE, CSA
Dimensions l x w x h 658 x 282 x 362 mm
25.91 x 11.10 x 14.25 in.
Weight 5.8 kg / 12.79 Ib.
*) D.C. = Duty cycle
WF 25i R,
WF 25i R PAP,
WF 25i R / L
Supply voltage 24 V DC / 60 V DC
Nominal current 0.5 A / 1.2 A
Welding current at 10 min/40 °C (104 °F) 40% D.C.* 500 A
60% D.C.* 450 A
100% D.C.* 360 A
Maximum shielding gas pressure 7 bar / 101.53 psi
Coolant Original Fronius
Maximum coolant pressure 5 bar / 72.53 psi
Wire speed 1 - 25 m/min / 39.37 - 984.25 ipm
Wire drive 4-roller drive
Recommended wire diameter 0.8 - 1.6 mm / 0.03 - 0.06 in.
Degree of protection IP 43
Mark of conformity CE, CSA
Dimensions l x w x h 658 x 282 x 362 mm
25.91 x 11.10 x 14.25 in.
Weight 4.8 kg / 10.58 Ib.
*) D.C. = Duty cycle
137
EN

Fronius TPS/i Push Specifications

General

Brand	Fronius
Model	TPS/i Push
Category	Welding System
Language	English