Fronius TPS/i Push - Push with Wirespool

Push with
wirespool
(6)
(8)
(5) *
(7) **
(
(1)
(2)
(3)
(4)
(1) TPSi power source
(2) CU cooling unit
(3) Upright console
(4) HP interconnecting hosepack
(5) Wirefeeding hose with inner liner
(6) Wirefeeder WF 15i R / WF 25i R / WF 30i R
(7) MHP /i R torch hosepack
(8) MTB /i R robot welding torch
Maximum wirefeed length:
max. 2 m between wirefeeder and wirespool
Possible wire diameters:
0.8 - 2.0 mm
Welding process:
Standard, Pulse, LSC, PMC
* Use the largest inner liner (incl. basic kit)
** Use the inner liner corresponding to the wire diameter (incl. basic kit)
24