Fronius TPS/i Push - Removing the OPT I MHP Wirebrake and Torch Body; Safety

Removing the OPT / i MHP WireBrake and torch
body
Safety
CAUTION!
Risk of burns from hot torch body, hot torch body coupling and other hot welding
torch components.
Before starting work on the torch body, the torch body coupling and all other welding
torch components:
▶
Allow the torch body, torch body coupling and all other welding torch components to
cool down to room temperature (+25 °C, +77 °F)
▶
Wear electrically insulated and heat protective gloves
▶
Use a suitable tool
Removing the
OPT / i MHP
WireBrake and
torch body
1 2
3
84