Contents
Safety rules 7
Explanation of safety notices 7
General 7
Intended use 8
Environmental conditions 8
Obligations of the operator 8
Obligations of personnel 8
Mains connection 8
Protecting yourself and others 9
Danger from toxic gases and vapours 9
Danger from flying sparks 10
Risks from mains current and welding current 10
Meandering welding currents 11
EMC Device Classifications 12
EMC measures 12
EMF measures 12
Specific hazards 13
Requirement for the shielding gas 14
Danger from shielding gas cylinders 14
Danger from escaping shielding gas 14
Safety measures at the installation location and during transport 15
Safety measures in normal operation 15
Commissioning, maintenance and repair 16
Safety inspection 16
Disposal 16
Safety symbols 17
Data protection 17
Copyright 17
Description of the warning notices on the device 18
System configurations 21
System configurations - conventional robot 23
Push with wire drum 23
Push with wirespool 24
Push with 4-roller unreeling wirefeeder and wire drum 25
System configurations - PAP 26
Push with wire drum 26
Push with wirespool 27
Push with 4-roller unreeling wirefeeder and wire drum 28
System components 29
WF wire-feed unit 31
Device concept 31
Proper use 31
Safety 31
Warning notices on the device 32
WF 25i REEL R /4R, WF 30i REEL R /2R 34
Safety 34
Device concept 34
Application area 34
Proper use 34
Warning notices on the device 34
Interconnecting hosepack 37
General 37
Torch hosepack 38
General remarks 38
Scope of supply 38
Buttons on the Robacta MHP hosepack 38
CrashBox /i 39
3
EN
To Next Page
Loading...
Need help?
General
