Fronius Robacta TTW 4500 - Robacta TTW 4500 Assembly; Safety: Robacta TTW 4500 Assembly; Robacta TTW 4500 Assembly Procedure; Fit Narrow-Gap Gas Nozzle Option

Assembling the Robacta TTW 4500
Safety
WARNING!
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
▶
Read and understand this document in full.
▶
Read and understand all safety rules and user documentation for this device
and all system components.
Assembling the
Robacta TTW
4500
IMPORTANT! Insert the tungsten electrode so that the tip protrudes approx. 10
mm (0.4“) out of the torch body. Slightly tighten the torch cap so that the tungs-
ten electrode can still be moved inside the torch body.
1
3
2
4
1
1
4
3
2
5
2
Fitting the nar-
row-gap gas
nozzle (option)
You will also need the following items to fit the narrow-gap gas nozzle:
-
Insulation ring D 35.5 mm - 42,0100,0010
-
Gas shield M18 x 1.5 mm - 42,0001,6781
-
Narrow-gap gas nozzle - 42,0300,3210
22