35
EN
Possible applications:
operating a heat pump or an air-conditioning system using as much self-generated power
as possible
Time / Date Set the time, date and automatic changeover between summer and winter time
Display settings
Setting range Set time / Set date / Time display format / Date display format /
Summer/winter time
Set time
Set the time (hh:mm:ss or hh:mm am/pm – depending on the setting for the time display
format)
Set date
Set the date (dd.mm.yyyy or mm/dd/yyyy - depending on the setting for the date display
format)
Time display format
For specifying the time display format
Setting range 12hrs / 24hrs
Factory setting Depends on country setup
Date display format
for specifying the date display format
Setting range mm/dd/yyyy / dd.mm.yy
Factory setting Depends on country setup
Summer/winter time
Activate/deactivate automatic changeover between summer and winter time
IMPORTANT! Only use the automatic summer/winter time changeover function if the
Fronius Solar Net ring does not include any LAN- or WLAN-compatible system compo-
nents (e.g. Fronius Datalogger Web, Fronius Datamanager or Fronius Hybridmanager).
Setting range on / off
Factory setting on
IMPORTANT! The time and date must be set accurately in order for the day and year val-
ues and for the day characteristic to be displayed correctly.
Setting range Language / Night mode / Contrast / Illumination
Language
Set language for display
Setting range German, English, French, Dutch, Italian, Spanish, Czech, Slo-
vak, etc.
Night mode
DATCOM night mode; controls DATCOM and display operation during the night or when
the DC voltage is insufficient
To Next Page
Loading...
Need help?
General
